For Starlink Mini 2026 Outdoor Roof Wall RV Seismic-resistant Bend Brackets(M2023)

1. High load-bearing capacity and all-weather stability: The main structure of the bracket is made entirely of durable carbon steel with an anti-corrosion coating, providing rust prevention, windproof, and rainproof properties.
2. Maintains structural stability even in harsh weather conditions such as heavy rain, strong winds, extreme heat, and blizzards, preventing loosening or deformation.
3. Both the support base and the top mounting position are equipped with adjustable multi-hole positions and curved grooves, allowing users to freely adjust the pitch angle of the bracket bend and the terminal equipment according to different building exterior shapes, wall inclinations, and satellite signal reception requirements.
4. Suitable for exterior wall installation in various scenarios. the product comes with two sets of wall fixing accessories: one set of metal expansion bolts for concrete/cement walls; the other set of plastic wall anchors (expansion tubes) and long wood screws for wooden walls.
5. Specific equipment compatibility: this bend bracket is specifically designed for specific MINI version satellite terminal equipment, with base and slot adaptation. Please note: It is not compatible with standard or high-performance version satellite terminal main bodies.
6. Carbon steel bend main body: vertical section height approximately 30 cm. 7. Mounting Base (Connecting Equipment End): Approximately 18 cm in length and 11 cm in width.
8. Wall support adjustment mount: approximately 21 cm in total length and 8.2 cm in width.

Installation steps:
1. Install the U-shaped adjustment mounting base onto the top mounting base and initially tighten the two fixing screws.
2. Place and tighten the two corresponding fixing nuts on the back of the mounting base.
3. Insert the carbon steel bend into the support mount, insert the four connecting bolts, adjust to the appropriate initial angle, and tighten with a wrench.
4. Select the wall installation location and drill holes in the wall according to the four mounting holes of the wall support mount.
5. Depending on the wall material (cement wall or wood wall), use expansion bolts or plastic expansion tubes + long screws to firmly lock the support mount onto the wall.
6. Adjust to the required alignment angle, attach a silicone protective pad to the top buckle, insert the satellite terminal equipment, and tighten the bottom fixing knob.

Accessories list:
- Carbon steel bend x 1
- Mounting base x 1
- Wall support base x 1
- Fixing screws, nuts, and washers assembly x 1 set
- Double-ended open-end wrench and Allen wrench combination x 1 set
- Protective silicone pads x 2
- Concrete-specific expansion bolts x 4
- Wood-specific long screws x 4
- Wood-specific plastic wall anchors x 4
- Connector assembly long screw and nut combination x 4